What Internet lines does TekSavvy use?

What Internet lines does TekSavvy use?

TekSavvy’s cable Internet offerings rely on Rogers, Shaw, Videotron or Cogeco infrastructure to connect customers to TekSavvy Internet. In areas served by Rogers, TekSavvy cable Internet is offered with either 15, 30 or 100 Mbit/s download speeds with the choice of 150GB, 400 GB or unlimited downloads.

How do I bridge my TekSavvy modem?

Bridge Mode

  1. Connect a PC directly to the LAN port of the ATA using an Ethernet cable.
  2. Log into the ATA using the User password. (
  3. Click on the BASIC SETTINGS tab.
  4. Scroll down to the section titled NAT/DHCP Server Information & Configuration and set the Device Mode field to Bridge.
  5. Click Update.
  6. Click Apply.

How do I put my DSL modem in bridge mode?

How to setup DSL 320B revision Z1 in bridge mode

  1. Step 1: Connect your computer by cable to the DSL-320B modem.
  2. Step 2: Open up your browser and enter
  3. Step 3: Log in to the modem.
  4. Step 4: As shown in the picture below.
  5. Step 5: Finish the ADSL Setup with Save Settings at the bottom of the page.

What is ADSL bridge mode?

Bridge mode is for disabling the router functionality within the unit so that you can use just the ADSL modem functionality. You are by-passing or going over the router functionality. You still have to properly configure the modem to connect to your ISP with the proper ATM VPI/VCI settings.

Is bridge mode the same as modem mode?

Differences Between Bridge Mode and Router Mode. The primary difference here is that a single router’s bridge feature is used to connect devices within the same network, whereas a router mode is used to connect devices to the Internet at large.

Do people still use a DSL?

Right now, according to the Ofcom Connected Nations report, 98 per cent of the country is able to get decent ADSL. Compare this to the mere six per cent that has access to full fibre, and it’s clear ADSL holds a significant place as a reliable, available backup.