How do I identify my chainsaw blade?

How do I identify my chainsaw blade?

​​What Chain Do I need? First -Look for any combination of numbers stamped on the guide bar. Saw chain and guide bars both have identification marks on them, and unless they are extremely worn out, they explain what pitch and gauge of chain is on your saw. Look for any numbers and letters on the drive links.

Do chainsaw blades fit all chainsaws?

No, chainsaw blades are not universal, not every bar and chain will fit on your machine. Chainsaw chains need to have the correct specification to fit on your bar. If you have a chain that is too long or too narrow it will not fit. Mixing brands of chains is no problem as long as they are compatible.

What do the numbers on a chainsaw blade mean?

Most consumer saws use a type of 3/8″ chain called “low profile”. We call it Picco. A few older saws use 1/2″ pitch chain. The second is the gauge, or the thickness of the drive lugs. 0.050″ (1.3 mm) and 0.058″ (1.5 mm) are most common, 0.043″ (1.1 mm) and 0.063″ (1.6mm) less common.

Can you interchange chainsaw blades?

A chainsaw blade is the most important part of a chainsaw, and without one, you can’t cut anything. Many people are unaware that chainsaw blades are not interchangeable. The teeth of the blade dictate how many teeth per inch (TPI) it has, and this impacts its cutting power.

What are the different types of chainsaw blades?

There are four main chainsaw blade / cutter styles, these are; square chisel, full chisel, semi-chisel and low profile. But then there are some variations of these four styles on the market, that we also go into detail about below. Read on to see the main chainsaw blade styles and their applications.

What chain will fit my chainsaw?

Your chain saw bar may have the information you are looking for stamped right into it. It can usually be found near the back of the bar, where it mounts to the saw. For instance, in the example on the right, the chain is 3/8” pitch and . 050” gauge with 72 drive links.

How long is a 72 Link chainsaw chain? Oregon Chainsaw chain for Stihl Chainsaw 20″ Bar Length 72 Drive links 3/8 Standard 0.05 Gauge : Patio, Lawn & Garden. To add the following enhancements to your purchase, choose a different seller.

Does any chain fit any chainsaw?

Not every bar or chain is right for every saw. For example, larger chainsaw bars work best with more powerful saws because it takes more energy to drive a chain around a long bar. That’s why electric saws use bars 18″ and shorter. Similarly, chainsaw chains are measured to fit certain bars.

Can I use a different brand chain on my chainsaw?

Are chainsaw chains interchangeable? Several manufacturers produce chainsaw chains, and the different brands are not interchangeable with all models. If you replace your chain with another brand, you must know the exact gauge, length, and pitch of the old chain.

Can I put a different bar on my chainsaw?

Most chainsaws can operate up to three different bar sizes. Guide bars are measured in length, from the tip of the bar to the heel, and range in size from 14 to over 40 inches. Check the specifications in your model’s operator’s manual to see what size bars you can run on your saw.

How do I know what size chain is on my chainsaw?

To get the correct size, simply count 3 rivets on the chain and measure the distance between them from the centre points. Now divide this by half to get your size. As an example, three rivets that measure ½ an inch across divided by two gives you a pitch of a ¼ inch.

What size chainsaw chain do I have?

How long should a chainsaw stay sharp?

On average, a chainsaw blade will retain its sharpness for about 3 hours of actively cutting through wood.