Who makes autopage remote start?
Auto Page was sold to automotive lighting company Varad in 2012. As of last year, Auto Page had about 100 dealers while in its heyday it worked with 300 to 400 dealers, said one industry member. Auto Page was a well-regarded remote start brand for many years.
What is 2 way paging remote start?
When you press a button the remote starter will execute the command and the vehicle will respond with parking light flashes. A 2-way system does the same but it also sends a signal back to the remote to notify you that the command has been executed.
How do I use autopage xt12 remote start?
Turn the Ignition ‘switch ‘OFF/ON’ 3 TIMES and stay in the ‘ON’ position. Within 15 seconds. Push the Programming switch 2 times holding in on the 2nd push, until a long chirp from the horn (optional) and the LED starts to flash then release the valet switch. You are now in the Transmitter programming mode.
What is the valet switch on autopage?
The valet button or switch permits the owner to temporarily bypass the alarm functionality of the system. To enter or exit valet mode, disarm the system with a working transmitter, your personalized manual override code, or using the procedure below which is to enter or exit valet mode.
What is the difference between 1 way and 2-way car alarms?
What is the difference between one-way and two-way alarms? One-way alarms send a signal from the key fob to the alarm. It’s usually pretty basic—arming or disarming the remote for the lights and sirens. Two-way systems send that signal, but they also send data back from the vehicle to the user.
Can aftermarket remote starter cause electrical problems?
If your car did not come with a remote starter and you want to install an aftermarket model, improper installation could lead to issues with your battery and electrical systems.
How do I turn off valet mode on autopage?
Push and hold valet switch for 2 seconds; the LED will turn off indicating the system is exiting the valet mode.
Can a remote car starter drain your battery?
However, it is still possible for a remote car starter to consume too much power from your battery. In this case, we highly recommend visiting your Compustar or Arctic Start installer if your vehicle’s battery repeatedly dies after you’ve installed a remote start system.