What is the difference between tekonsha P2 and P3?
The primary difference between the two is that the P3 uses what I would call a more user friendly display. Instead of an error code like what’s displayed on the P2, the P3 will actually spell out in plain English what the problem is.
Which is the best electric brake controller?
Tekonsha P3 Model 90195 : Best Overall.
Does tekonsha P3 turn off?
Expert Reply: The Tekonsha Prodigy P3 Brake Controller, # 90195, does not have an on and off switch. It will go into sleep mode after several minutes of no activity. The power draw when it is in the sleep mode is so negligible that it will not discharge the battery.
What is PL on Prodigy brake controller?
On a Prodigy P2 trailer brake controller # 90885 the error code PL indicates power loss, that the controller is losing its 12V power connection to the battery while your foot is on the brake pedal.
How do I choose a brake controller?
Before choosing a trailer brake controller, consider the type of trailer you will be towing and the frequency you will be traveling. If you will be towing heavy cargo such as livestock, construction materials, or any other fragile cargo, go for the proportional brake controller.
Does the tekonsha P3 stay on all the time?
The display of the P3 will remain active for up to 15 minutes after the ignition is turned off, at which point the screen… view full answer…
Does tekonsha P3 need to be level?
Expert Reply: The Tekonsha P3 would need to be mounted so that it is level in the side-to-side orientation, and pointed so that it is parallel to the direction of travel.
How does the Prodigy P2 work?
The Prodigy P2 electric brake controller supplies power to your tow vehicle’s brakes proportionally. This means that your trailer brakes at the same time and with the same strength as your vehicle – even in reverse gear.
Does tekonsha P3 stay on?
What should the output voltage be on tekonsha P3?
The third is output power to the brakes. If you are sitting still and using the brake pedal then that will read 0.00 but if you use the manual override it should gradually increase to 12V if you have your max output set to 12V.
Does P3 brake controller turn off?
How do you turn off Prodigy P2?
Answers. The display on the P2 will shut off automatically after 20-30 minutes of inactivity. The control will go into its sleep mode after 20-30 minutes of no brake pedal application or no manual lever activation.
Do electric brakes work in reverse?
Yes, electric brake assemblies will work in reverse. The brake controller in your tow vehicle would still activate in reverse as long as the brakes are applied. The actuating arm of the Dexter assemblies part # 23-27 will apply the brakes when pushed in either direction.
Is the Prodigy P2 brake controller better than the P3?
So, it is better that you configure the settings according to your usage. The Prodigy P3 is another great brake controller that functions in a similar way to the P2 model. The product is an upgraded version of the previous model and has been equipped with lots more features.
What is the difference between the P2 and the P3?
The major differences I see are 3 axis accelerometer in the P2 vs 1 axis in the P3. Looks like that would essentially eliminate alignment issues. The other difference seems to be the display capability and fault detection. Am I missing something here? Actually, the P3 now has the upgraded axis accelerometer like the P2.
Is the Prodigy 2 easy to install?
The Prodigy 2 is simple to install and you should not have much trouble using it. While the Prodigy can be a little tricky to use and is also quite expensive when compared to the prior.