What is the cost of VDF flooring?

What is the cost of VDF flooring?

VDF Flooring;5000 Sq ft, Rs 80/square feet Grid Cubes Private Limited | ID: 19773475262.

What is the difference between VDF and IPS flooring?

Unlike IPS, a VDF floor calls for a more skilled labour with almost twice as many man hours over the same stretch….. This system raises the cost as there is machinery required, but appearance wise and strength wise the VDF (Vacuum Dewatered Floor) floor stands out……

What is the thickness of VDF flooring?

As in case of Railways, the VDF System is recommended for Workshops Flooring with the specifications as follows – “Vacuum dewatered cement concrete 200 mm thick of M20 grade or above with a tough & wear resistant topping layer of 1.5 cm thickness.

How is VDF flooring done?

The Vacuum Dewatered Flooring or VDF Flooring is a system for laying high quality concrete floors where the key is Dewatering of Concrete by Vacuum Process wherein surplus water from the concrete is removed immediately after placing and vibration, thereby reducing the water: cement ratio to the optimum level.

What is difference between VDF Trimix flooring?

VDF flooring is also known as Vacuum Dewatered Flooring, trimix flooring, monolithic industrial flooring, or tremix flooring. VDF flooring helps to provide high strength and a longer life span to the floors. It is a fast method of laying down floors at any place.

Is code a VDF floor?

IS 2571: Code of practice for laying in-situ cement concrete flooring.

What is the grade of concrete used in IPS flooring?

It is generally used for all types of floors and mix of concrete used for IPS flooring specification is 1:1.5:3 (cement, sand and stone aggregates). As per the nature of use the flooring thickness of concrete is decided from 25 mm to 50 mm.

What is difference between PCC and Trimix?

Floor slope must be maintained in PCC work, which shall be laid above the stone soling. The thickness of the PCC shall be kept at 100 mm. Trimix has to be done in the panel and each panel shall be of 3.5 meters and an appropriate steel bar shall be laid in layer two or one keeping the concrete cover of 50 mm.

What is Trimix flooring specification?

It is generally used for industrial purpose, where rigid surface necessary for machine foundation, light load carrier vehicle and light weight cranes. Generally the mix of concrete used for Tremix is 1:1:5:3 (1 cement: 1.5 sand and: 3 stone aggregates), mostly rich mix of 1:1:2 preferred for better wear and tear.

What is meant by IPS flooring?

IPS flooring stands for Indian patent stone flooring, it is a basic type of flooring which provides good wearing properties. It is generally used for all types of floors and mix of concrete used for IPS flooring specification is 1:1.5:3 (cement, sand and stone aggregates).

What is fm2 flooring?

FM-2 CATEGORY FLOOR Typical floor use- Building containing wide aisle racking with stacking or racking over 8-m high, free movement areas and transfer areas.

What is PCC flooring?

PCC / Plain Cement Concrete is a construction material generally used as binding materials and is composed of cement, (commonly Portland Cement) and other cementitious materials such as fly ash and slag cement, aggregate (generally a coarse aggregate made of gravels or crushed rocks such as limestone or granite, plus a …

What is Trimix flooring?

Tremix System also known as Dewatering System is used in making Industrial Floors, Concrete Roads, Runways, Railways Platforms, Warehouse container Yards, Canal Lining, Pathways, Bridges, RCC Roads, etc. The Tremix process gives the below properties to concrete: » Higher Compressive Strengths. » Faster Initial Strength.

What is Kota stone flooring?

Kota stones are a type of fine-grained limestone mined in Rajasthan, India. It is available in a wide range of colours and finishes which can be used indoor and outdoor flooring depending on your preference.

What is an FM1 floor?

The specialist survey company confirmed that Level Best had successfully achieved a FM1 surface regularity floor class – the highest floor class achievable in free-movement floor areas.

Which cement is best for PCC?

Portland Pozzolana Cement (PPC): PPC cement is generally used for plastering, brick masonry and waterproofing works. PPC has a lower heat of hydration and it is prone to fewer cracks compared to OPC. PPC has lower strength than OPC but PPC provides better workability and finishing than OPC.

Which is better granite or Kota stone?

Granite is non porous, while Kota stone is porous as it is comprised of limestone. Polished granite does not get easily discoloured with acids. Kota stone can get stained and discoloured. Granite is much more expensive than Kota, which is one of the cheapest natural stones available.

Is Kota stone cheaper than marble?

Kota stone is much cheaper than marble and granite, hence makes economic sense. Depending upon the location, it can be laid polished side up anyway, but also can be laid the unpolished side up to get a textured floor finish.

What is TR34?

What is TR34? TR34 is, in its basic definition, a technical record produced by The Concrete Society. TR34 is intended to give comprehensive guidance on the design, construction and maintenance of a floor.