What is the best fuel for two-stroke engines?

What is the best fuel for two-stroke engines?

If you own a 4 stroke, for example, the 82-octane works just fine, but for a 2-stroke, you should go for the ethanol-free higher octanes (92 and 93) because the lower octanes tend to detonate. Two-stroke dirt bikes also require a special fuel/oil mix.

What VP fuel is 110 octane?

VP 1392 VP110 110 Octane Leaded Racing Fuel 5-Gallon Pail.

Can you mix 110 octane with 91?

equal parts 91 and 110 added would give you an approximate 100 performance number. originally gasoline was a mix of (mostly) octane and heptane.

Is higher octane gas better for 2-stroke engines?

High performance 2 cycle engines love the octane they were designed for. Any higher octane rating over that will contribute to overheating and lower power. Higher octane fuel does one thing. It burns slower.

What is the best VP fuel for 2 stroke?

Bottom line: VP-110 is a good, all-around fuel for hopped-up two-stroke engines. MXA mixes VP-110 with pump gas for use in slightly modified two-stroke engines in mixtures from 25/75 to 50/50.

Is VP 110 leaded or unleaded?


Fuel Name Color Type
VP 100 Orange Unleaded
VP 101 Orange Unleaded
VP 110 Purple Leaded
VP 113 Green Leaded

Is 110 octane fuel unleaded?

So when it comes to leaded vs unleaded, the rule of thumb is unleaded if you have oxygen sensors and leaded if you don’t. In the case of older engines, any leaded fuel with an octane of 110 or close to it works great.

What fuel should I use in my 2 stroke outboard?

Unleaded Gasoline 95 (SP95) is composed of 95% octane and 5% heptane. Mercury recommends this fuel for all of their 2-stroke outboard engines despite a high percentage of ethanol. In fact, SP95 gasoline contains 5% ethanol (therefore 50% less than E10 gasoline).

What kind of gas should I put in my 2 stroke outboard?

87 octane
“The best thing you can do for any motor is buy gas of known, high quality,” says David Grigsby, Yamaha’s product manager. “We recommend 87 octane for both our two- and four-stroke motors. We stress the importance of a good, name-brand gasoline.”

What is the difference between C12 and 110?

VP 110 is for compression ratios that are 12:1 and below where C12 is for 15:1 and below. Very small difference in octanes. Another good fuel is the VPR. It’s around 100 octane but has some oxygen added to it to help it flow n burn.

Is VP 110 oxygenated?

We tested the VP113, which is an oxygenated fuel, against the VP-110, which is a very high quality standard race fuel. The VP113 is considered a 5-percent oxygenated gas, and we were running it on what you might consider a standard Street Stock motor with a two-barrel carburetor.

What color is 110 octane fuel?

Sunoco® Standard™ is a 110 octane leaded race fuel that is used in many forms of motorsports….Specifications.

Octane 110
Color Purple

Can I use 110 octane?

Owner. EZ- Your engine is not set up to take advantage of 110 octane fuel, but it will definitely not cause your car to overheat. The higher the octane you use, up to a certain limit, the more resistant the fuel is to preignition/detonation/knocking, allowing an engine to run more ignition advance.

Should I run premium gas in my 2 stroke outboard?

That said, your choice of fuel remains critical. Burning 87-octane gasoline in a two-stroke outboard causes carbon buildup that shortens engine life. Dose the fuel with a carbon-cleaning additive or fill the tank with 89-octane or higher fuel.

What is VP 110 race fuel?

Formulated for use in naturally aspirated engines with compression ratios up to 12:1. We formulate VP 110 race fuel for use in naturally aspirated engines with compression ratios up to 12:1. Moreover, there’s nothing standard about this 110 blend. It reflects the consistent quality racers rely on from VP products.

Why VP T2 2-Stroke fuel?

This increases the time between rebuilds, extends the life of your engine, and lowers your long-term costs, all while making more power over pump gas. We formulate VP T2 2-stroke engine fuel at a 40:1 ratio of fuel and oil.

How much does a VP 110 blend cost?

Reflecting the consistent quality racers rely on from VP products, theres nothing standard about this 110 blend. Formulated for use in naturally aspirated engines with compression ratios up to 12:1. $ 75.00. VP 110 quantity.

What fuel to use for 2 stroke?

If the op is looking for performance he should get the oxygenated fuel for 2 strokes and if he just wants fuel safe for a 2 stroke and cheap then the C12 or 110. In my experience, straight C12 or 110 make less power on the dyno than 93 pump and 50/50 mix with pump.