What is SAE J1991?
SAE J1991—Standard of Purity for Use in Mobile Air-Conditioning Systems SAE J2196—Service Hose for Automotive Air-Conditioning 2.1.2CGA Publications—Available from CGA, Crystal Gateway #1, Ste.
What is SAE J1990?
SAE J1990, Extraction and Recycle Equipment for Mobile Automotive Air-Conditioning Systems. ARI Standard 700-88. Application. This information applies to refrigerant used to service automobiles, light trucks, and other vehicles with similar CFC-12 systems.
What is the current standard for recovery only equipment is SAE?
The federal agency, according to information from the Automotive Aftermarket Industry Association (AAIA), recently issued a Direct Final Rule requiring that refrigerant recovery equipment used for vehicle air conditioner repair meet SAE standard J2810, replacing the current standard J1732.
What is SAE J2099?
SAE J2099 – (R) Standard of Purity for Recycled R-134a (HFC-134a) and R-1234yf (HFO-1234yf) for Use in Mobile Air-conditioning Systems | Engineering360.
What organization sets the purity standards for recycled refrigerant?
AHRI
AHRI is an organization that produces modern guidelines for the HVAC industry. AHRI Standard 700-2016 dictates the specifications of purity that refrigerant must be reclaimed to before being resold.
What does SAE Standard j2788 apply to and what are the details of this standard?
The purpose of this SAE Standard is to establish the specific minimum equipment performance requirements for recovery and recycling of HFC-134a that has been directly removed from, and is intended for reuse in, mobile air-conditioning (A/C) systems.
What is SAE Standard j2788?
Scope The purpose of this SAE Standard is to establish the specific minimum equipment performance requirements for recovery and recycling of HFC-134a that has been directly removed from, and is intended for reuse in, mobile air-conditioning (A/C) systems.
What is the standard for purity for recycled R-134a?
. SAE J2099—Standard of Purity for Recycled HFC-134a for Use in Mobile Air-Conditioning Systems SAE J2196—Service Hoses for Automotive Air-Conditioning SAE J2197—Service Hose Fittings for Automotive Air-Conditioning 2.1.2.
Which SAE standard S must be referred to on the label of approved HFC-134a refrigerant recycling machines?
. Reference Section SAE J2099—Standard of Purity for Recycled HFC-134a for Use in Mobile Air-Conditioning.
What is the maximum level of non condensable gases in recycled R 134a?
J2099 is also a purity standard that sets limits for contaminants in recycled R-134a and R-1234yf: 1) moisture—50 ppm by weight, 2) lubricant—500 ppm by weight, and 3) non- condensable gases (air)—1.5% by volume.
What is 40 CFR Part 82 Subpart F certification?
EPA regulations (40 CFR Part 82, Subpart FExit Exit EPA website) under Section 608 of the Clean Air Act require that technicians who maintain, service, repair, or dispose of equipment that could release ozone depleting refrigerants into the atmosphere must be certified.
What is SAE J2788?
What is SAE Standard J639?
HFC-134a (Relevant SAE Standard: J639) HFC-134a is the most common MVAC refrigerant used since the 1990s. Although HFC-134a does not deplete the ozone layer, it is a potent greenhouse gas with a high global warming potential.
When retrofitting a CFC 12 system to HFC-134a you should?
Section 612 of the Clean Air Act, which describes the Agency’s Significant New Alternatives Policy (SNAP) program requires that when retrofitting a CFC-12 vehicle for use with another refrigerant, the technician must ensure: Proper removal of CFC-12 prior to filling the system with HFC-134a.
What is SAE Standard J2099?
What is the difference between EPA 608 and 609?
Section 608 technician certification is required to purchase ozone depleting or non-exempt substitute refrigerants, such as HFC refrigerants. Section 609 technician certification is required to purchase CFC-12 or EPA-approved substitutes for MVACs containing an ODS.
What is SAE J2196?
SAE J2196. November 1, 2011. Service Hose for Automotive Air Conditioning. This SAE Standard covers reinforced rubber, reinforced thermoplastic, or otherwise constructed hose, or hose assemblies, intended for conducting liquid and gaseous refrigerants for service… SAE J2196.
Which refrigerant is a HFC?
HFC Refrigerant: HFC refers to the chemical composition of the refrigerant. Hydrofluorocarbon indicates that the refrigerant is comprised of Hydrogen, Fluorine, and Carbon. Common HFC refrigerants are R-32, R- 125, R134a, R-143a, and R-152a. A blend that contains different HFCs is considered an HFC refrigerant.