What is RTLO transmission?
Acronym. Definition. RTLO. Roadranger Twin Countershaft Low-Inertia Overdrive.
What does RTLO stand for in Eaton transmission?
Roadranger Twin Countershaft w
RTLO = Roadranger Twin Countershaft w/Low Inertia. and Overdrive.
What is the gear ratio of a 18 speed transmission?
| Eaton Fuller 18 Speed Transmission Gear Ratios | ||
|---|---|---|
| MODEL 18 SPEED | Lbs-Ft. Max TQ. | 5 |
| RTLO-14718B | 1450 | 1.95 2.29 |
| RTLO-14918A | 1450 | 1.95 2.29 |
| RTLO-14918B | 1450 | 1.95 2.29 |
What is a low inertia transmission?
Low-Inertia Concept: These transmissions feature a simple mainshaft which is not splined to the auxiliary drive gear. This unique design eliminates the added mass, drag and inertia of the entire auxiliary section.
Do they still make 15 speed transmission?
Eaton’s Versatile 15-speed manual transmission provides high-performance for both on-highway and on/off-highway applications. This transmission features ten road speeds plus five deep reduction gears for on/off highway versatility.
What is RTLO18918B?
The RTLO18918B Eaton Fuller Transmission features unbeatable versatility. The transmission operates as a 9, 10, 13, or 18-speed transmission, with 19.7 to 1 overall reduction and 14.40 low gear. It also has economical performance with 0.73 and 0.86 overdrives for efficient cruise RPMs.
What oil goes in a Eaton Fuller transmission?
Roadranger SAE 50 Synthetic Transmission Lubricant is a specially formulated synthetic lubricant designed for Eaton trans- missions. This product is extended drain and severe service capable to protect the higher torque manual and automated mechanical transmissions coupled with high horsepower engines.
What is inertia ratio?
What is an Inertia Ratio? Inertia is an object’s resistance to a change in speed. The heavier or dimensionally larger an object is, the higher its inertia will be. In a motion control or servo system, both the motor and load have inertia. The ratio between their inertias will affect the performance of the system.
How does gear ratio affect inertia?
Adding a gear set or a gearbox to a motor-driven system reduces the load inertia by the inverse square of the gear ratio, meaning that even a relatively low gear ratio can have a significant effect on the inertia ratio.
How many reverse gears does an 18-speed have?
3 reverse speeds
There are 3 reverse speeds in reverse.
How much oil does a Eaton Fuller transmission take?
28 pints
Approx. 28 pints [13.3 liters]. Integral oil pump standard.
How much gear oil does a Eaton rear end hold?
The owner’s manual says it takes up to 15 quarts.
What parts have been replaced on the rtlo-16913a?
Item Current Part Description Replaced Part Qty. Notes Kits/Assys Where Needed TA-F04- 12X RTLO-16913A NEW SVC EXCH TRANS 1 WITH INTERNAL PUMP – NO CLUTCH HOUSING TA-F04- 50R RTLO-16913A REMAN TRANS 1 WITH FORCED LUBE TA-F04- 50RDS RTLO-16913A REMAN TRANS 1 DEALER STOCK – 14 DAY LEAD- TIME – WITH FORCED LUBE
What are the ratios in the auxiliary section of a gear?
The auxiliary section contains LO and HI range ratios, plus the L and H splitter gear ratios. The LO position in the front section is used only as a starting gear. The other four ratios are used once in LO range and once again in HI range.
How many ratios can be used in the hi range?
The other four ratios are used once in LO range and once again in HI range. Each of the four ratios, when used in HI range, can be split with the splitter control button.