What is Roosa Master?
The Roosa Master injection pump was the first distributor-type to provide a simple mechanism for controlling the speed of generator sets, thereby reducing its complexity and number of parts.
How does a DB2 injection pump work?
With the DB2, engine rpm is controlled by a rotary fuel-metering valve. When the accelerator is depressed, the throttle linkage opens the metering valve in the injection pump, allowing more fuel to be delivered to the pumping chamber.
What is the function of plunger in the injection pump?
A fuel injection pump plunger which enables the timing of the fuel injection to be controlled in accordance with the engine load, and can be used to prevent the emission of exhaust smoke and to achieve quieter engine operation, and under full-load conditions enables the engine to regain speed rapidly.
How does a Stanadyne injection pump work?
The fuel between the blade is carried to the bottom of the transfer pump liner and enters the outlet groove. As a result, pressurized fuel is delivered through the pump into a channel to the hydraulic head passage. Fuel delivered to the head passage by transfer pump pressure splits in several directions.
Which type of fuel metering system is used by Bosch VE distributor injection pumps?
Figure 10.32 illustrates layout of a VE-type pump installed in a self-bleeding fuel system similar to that used on light vehicles. Similar to other rotary pumps, this type uses one pumping element and a number of high-pressure outlets, one for each engine cylinder.
What causes airlock in diesel engine?
When you change a diesel fuel filter, run out of fuel or disturb the fuel system, air is trapped. When you try to start the engine this air acts as a lock, preventing the normal supply of fuel into the cylinder.
How do I advance my injection pump timing?
Some of the most common ways to advance the timing are:
- Program the ECM. The engine control module is a computer that analyzes information to control your boat’s performance.
- Modify the Fuel Injection Pump.
- Replace the Camshaft.
- Swap Out the Cam Gaskets and Followers.