What is porotherm block?
Porotherm clay bricks are horizontally or vertically perforated clay bricks. they are manufactured in variety of sizes (common size is 400x200x200 mm) from natural clay, coal ash, rice husk, and granite slurry. The term porotherm is used for this type of brick due to its desired thermal insulation characteristics.
Do porotherm bricks need plastering?
Also the need for plastering material is again reduced since the bricks already have uniform and smooth surface. Better yet, you can enjoy the trendy interiors and exteriors by keeping bare walls, as the Porotherm bricks are aesthetically pleasing to the eye.
How much do porotherm blocks cost?
around 48.00 INR per piece
6. The advantage of overall price: Porotherm bricks cost around 48.00 INR per piece. Whereas, AAC block brick costs around 125 INR. Solid concrete bricks cost around 34.00 INR.
What are porotherm blocks made of?
Besides clay, Porotherm blocks are made up entirely of natural ingredients such as rice husk ash, sawdust, coal ash, etc. Hence, there is no release of harmful toxins into the atmosphere. They are also recyclable and save a considerable amount of energy from being wasted.
Are porotherm bricks load bearing?
Highly engineered bricks for load bearing construction, allowing you to build up to G+3 floors and save on RCC frameworks. The concept of load bearing construction will usher in an engineering revolution in the construction industry. These are the bricks of the future… NATURAL COMFORT FOR GENERATIONS!
What is the size of hollow blocks?
Hollow concrete blocks come in a variety of sizes, such as 100 mm x 200 mm x 400 mm, 150 mm x 200 mm x 400 mm, and 200 mm x 200 mm x 400 mm.
What is Hurudees?
Clay Blocks (Hurudees). This is made with soil its good for Wall construction. Weight less and Cool atmosphere inside the rooms.
What are porotherm smart bricks?
Porotherm Smart Bricks are 60% lighter than conventional walling material thus allowing substantial savings on structural cost due to reduction in dead load. This also allows for faster construction and ease of handling. Comfortable and healthy living.
What is AAC block construction?
AAC blocks are a precast, foam concrete, sustainable construction material made from aggregates of quartz sand, calcined gypsum, lime, portland cement, water and aluminium powder. After mixing and moulding, the concrete is autoclaved under heat and pressure and it thus gains its distinctive properties.
How do you calculate hollow block?
Divide The Total Volume Of The Wall By Volume Of One Block: Consider 5% wastage of concrete blocks. So the total numbers of blocks required = 86 + (86 x 5/100) = 86 + 4 = 90.
What is the weight of hollow block?
Hollow Block
| Description | Size | Average Weight per Block |
|---|---|---|
| 4” LOCAL | 400x100x200mm | 12.20 kg |
| 6” LOCAL | 400x150x200mm | 15.80 kg |
| 8” LOCAL | 400x200x200mm | 21.00 kg |
| 2 PISTON BLOCK | 400x200x200mm | 18.2 kg |
Are porotherm bricks good?
Porotherm Bricks are 60% lighter than conventional walling material which allows substantial savings on structural cost due. This also allows for faster construction and ease of handling. Excellent thermal insulation which is 45% better when compared to other conventional construction materials.
What is the density of AAC block?
The dry density of AAC Blocks were measured in lab and mean density was found to be 617.6 kg/m3.
How do you calculate AAC block?
Size of Bricks = 625 mm x 240 mm x 150 mm. Volume of One AAC Block without mortar = 0.625 m x 0.24 m x 0.15 m = 0.0225 cum. = 1/ (0.0225) = 44.44 Nos. Size of AAC Block = 630 mm x 245 mm x 155 mm.
What is the volume of hollow block?
The core volume of a standard size 6-inch concrete block is approximately 392 in3 or 0.006424 m3.
What is density of block?
Dense aggregate blocks have a density in the range 1800 – 2100 kg/m3, while lightweight aggregate blocks (otherwise known as Medium Dense) have with a density in the range 650 – 1500 kg/m3. Aircrete blocks have a density in the range 400 – 900 kg/m3.
How do you find the density of a hollow block?
3.2 Block Density — The density calculated by dividing the mass of a block by the overall volume, including holes of cavities and end recesses.
How do you find the density of a block?
The formula for density is the mass of an object divided by its volume. In equation form, that’s d = m/v , where d is the density, m is the mass and v is the volume of the object.
What is the weight of 1 AAC block?
AAC block has a weight of 9-12 kg depending on moisture conditions. When compared with redbricks 60% of dead load on structure is decreased.