What do IP rating numbers mean?

What do IP rating numbers mean?

Ingress Protection
What is an IP Rating? Ingress Protection. The IP rating or IP code classifies the degree of protection provided by an enclosure, for electrical equipment with a rated voltage not exceeding 72.5 kV. IP ratings are defined by the international standard EN 60529 (British Standard BS EN 60529:1992)

What does IP20 mean?

An IP20 rating means the product is touchproof and will be resistant to dust or objects that are over 12mm in size. However, it has no protection whatsoever against liquids and will be susceptible to damage if it comes into contact with sprays of water.

What is a good IP rating?

IP65: Dust-tight and protected against low-pressure water jets. IP66: Dust-tight and protected against strong jets of water. IP67: Dust-tight and protected against temporary, limited depth and duration immersion in water. IP68: Dust-tight and protected against complete immersion in water.

Is IP20 OK for bathroom?

For specially IP rated luminaires you will find each product clearly marked with its IP rating PLUS the highest zone in which it can be installed. Most bathroom light fittings are IP20 or above rated, and depending on their IP rating they can be mounted in the different zones in the bathroom.

What is the difference between IP20 and IP65?

Using an IP20 strip inside of an aluminium profile is highly recommended for indoor situations, then for outdoor IP65 can mostly suffice unless protection from the elements is impossible, then go IP67.

What does IP20 and IP44 mean?

From this we can see that an IP20 light has will not let children poke fingers into somewhere they shouldn’t and it’s not protected and water, whereas an IP44 (common outside light rating) will prevent small items, wires etc entering, and is protection against rain splashes.

Can IP20 go in bathroom?

What is the IP rating for rain?

Water Pressure

Water Ratings Protection Usage
20 ATM Withstands pressures equivalent to a depth of 200 meters (656 feet) Rain, splashing, accidental submersion, showering, swimming, snorkeling, surface diving and water sports. No deep water diving.

Can IP20 be used in kitchen?

IP ratings for kitchens A light above the stove or sink needs an IP rating of at least IPx4, to protect against moisture buildup (the dry protection rating is completely up to you). Whereas a kitchen light above a bench or a table would only need an IP20, as no water would likely come into contact with it.

Can IP20 be used in bathroom?

What’s the difference between IP20 and IP44?

In short IP20 means it’s touch proof and IP44 means it’s resistant to water and dust. Anything above IP44 can be used in bathroom zones 1 and 2 which includes mounting them directly above a shower.

Is IP20 better than IP65?

What is bathroom IP?

An IP65 rating is recommended. Zone 2 is an area stretching 0.6m outside the perimeter of the bath and to a height of 2.25m from the floor. In these bathroom zones an IP rating of at least IP44 is required.

What IP rating is weather proof?

IP ratings of IP65, 66 and 67 are considered waterproof.

What is the difference between IP20 and IP21?

IP20 Protected from touch by fingers and objects greater than 12 millimeters. Not protected from liquids. IP21 Protected from touch by fingers and objects greater than 12 millimeters. Protected from condensation.

What IP rating should a bedroom be?

IP20 is a very common rating for lights and you can be assured that a product with this label can be installed in many indoor rooms. The digit 2 means that nothing over 12mm can enter, while the 0 digit advises that there is no water-ingress protection.

Is IP20 okay for kitchen?

It’s sensible to use IP20 rated products in the kitchen to avoid: Steam generated moisture. Condensation or water drips.

Can IP20 go in a bathroom?