How should PC fans be installed?
Generally, you want the case fans in front of the case drawing in air while the fans at the rear blow air out. If your case has vents at the top, they should be placed as exhaust fans because hot air will rise. Side-mounted fans should be used for intake, though they often don’t have air filters.
Where do LED fans plug in?
Connect LED to System Fan Header To connect the cable from LED to the motherboard, simply insert them on the System Fan Header. You can only insert these cables and header a certain way. If you find it difficult to insert the cable, simply flip the connector and try again.
What do RGB fans plug into?
Use RGB Y-Cable to connect the fan and the motherboard. Please use RGB 4-Pin connector to an RGB header, and 4-pin fan connector to a fan header on the motherboard.
Can you connect a 3-pin RGB to 4-pin?
You can plug a 3pin into a 4pin header for Fans but not ARGB You can’t. 3-pin ARGB headers are 5V with a 5V pin, a single data pin, a blank spot and a ground pin. 4-pin RGB headers are 12V with 12V, red, blue and green pins. Plugging an ARGB strip into a non-ARGB header will blow out the strip.
Is 4 fans enough for a gaming PC?
A gaming PC will need at least three case fans to properly regulate heat and keep the components cool. At the minimum, two case fans are needed for optimal cooling, and ideally three. An exhaust fan should be placed on the back panel, while an intake fan should be placed on the front panel.
Can I plug RGB fans into motherboard?
Why do my RGB fans have 2 cables?
Every single RGB fan comes with at least 2 cables. The first cable which is used for the Motor of the fan is a “female” connector with either 3 or 4 holes in it. The second cable is used for the RGB, it’s much wider and ends on a 4-pin or 3-pin connector.
Can I use RGB fans without RGB header?
Yes, they will definitely work even without an RGB header but only as simple fans. The RGB part of them won’t be enabled. In that case, you’ll have to purchase a ARGB controller and a HUB to connect and synchronize them.
Will a 3 pin fan work with a 4 pin connector?
A 3-pin case fan can easily be connected to a 4-pin connector on the motherboard. The fourth pin is simply left blank in this configuration. In most cases, it will then run unregulated at a fixed speed. Some newer boards offer the possibility to adjust the fan speed by voltage.
Do you need RGB header for RGB fans?
No. You just need to connect the lighting node to a USB header on your motherboard. You will then connect the RGB cord from the fan(s) to the lighting node.
Can you connect a 3 pin RGB to 4 pin?
Where do RGB fans connect to motherboard?
Install the fans in your PC case, and screw it in the designated areas. 3. Use RGB Y-Cable to connect the fan and the motherboard. Please use RGB 4-Pin connector to an RGB header, and 4-pin fan connector to a fan header on the motherboard.