How heavy is a concrete pump hose?
Slick Line Pipe for Concrete Placement
| Line Size | Wall Thickness | Weight |
|---|---|---|
| 2.0” | 0.109” | 29 lbs |
| 2.5” | 0.120” | 38 lbs |
| 3.0” | 0.125” | 45 lbs |
| 3.0” | 0.216” | 76 lbs |
How big is a concrete pump hose?
By far, the most common size of hose used in small line concrete pumping is 2”. This size of hose is manageable when filled with concrete and easy enough to roll and stack when the job is done.
What is concrete pump rubber hose?
Application: Steel cord hose used for concrete placement at casting locations; it is used at the end of the pumps to distribute the concrete. The hose resists suction during the cleaning process. Usually supplied with swaged on “Full flow”hardened Couplings.
How long is the hose on a concrete pump?
The concrete pump hose can range in diameter from 2 inches to 5 inches and are usually 10 feet long. The larger diameter hoses 3, 4, and 5 inch are typically used for pumping concrete and the 2 inch pump hose is mostly used for pumping grout and shotcrete.
How much does a 3 inch concrete hose weight?
When you take the weight of a 3-inch steel reinforced hoses, which weighs approximately 60 lbs. apiece, and then fill it up with concrete, each line you are working with can weigh 120 lbs. Working with the 2.5-inch fiber line therefore makes things a whole lot lighter.
How much concrete can you pump an hour?
30 to 100 cubic metres
Concrete pumps can pump large volumes of concrete as quickly as a truck mixer can discharge the concrete. Many pumps can pump 30 to 100 cubic metres of concrete per hour.
How much does a concrete pump weigh?
CTY-100 Specifications
| Dimensions & Weight | ||
|---|---|---|
| Weight | 17,380 lbs | 7,882 kg |
| Length | 27′ 11″ | 8.5 m |
| Width | 8′ .5″ | 2.45 m |
| Height | 6′ 8″ | 2.04 m |
How hose is manufactured?
When it comes to manufacturing, rubber hoses can be produced in several methods, including extrusion, spiral wrapping, calendaring, hand layup and molding. In general, small diameter hoses are primarily produced through extrusion, while larger diameter rubber hoses are typically created through spiral wrapping.
What is PTFE hose?
PTFE Hose is a very versatile and durable alternative to rubber hose. PTFE (Polytetrafluoroethylene) is used as a liner for stainless steel braided hose or rubber hose to increase temperature range compatibility, chemical resistance, flexibility and shock resistance.
Is pumped concrete weaker?
Using the same aggregate to cement ratios in a mix, the dryer mix that a concrete pump can deliver can produce concrete that withstands 3000 PSI. But to deliver the same mix with a chute system, it must be much wetter and the resulting concrete will likely only produce strength of 2,000 PSI (if you are lucky).
What is the largest concrete pump truck?
Putzmeister’s M 70-5
With a 70 m vertical reach, Putzmeister’s M 70-5 is the biggest truck-mounted concrete placing boom in the world.
What is the reach of a concrete pump truck?
One of the primary benefits of using concrete pumps is the ability to reach longer distances. So, how far can a concrete truck reach using a pump? The vertical reach is roughly 137 feet for a typical boom pump, and the horizontal reach is about 124 feet.
What distance Can concrete be pumped?
Ground line hydraulic pumps can shift concrete at 1m³ each minute and can extend to a distance of around 150 meters, in order to reach the pour site. This makes concrete pouring in awkward areas simple, as the pipes and hoses can go up, over and around obstacles.