How do you clean a fuel filter on a leaf blower?
Pull the fuel filter from the housing and remove the pre-filter from the rest of the unit. Wash the pre-filter using soapy water and place it for about an hour on a rag or paper towel to dry. Remove the felt filter element and either blow it out using a can of air or clean it using a paintbrush.
What is the fuel mixture for a Craftsman leaf blower?
Craftsman leaf blowers often include a two cycle engine oil with every purchase of their equipment. Most models from this brand call for a 40 to 1 gas to oil mix, so you will need 3.2 ounces of that oil per US gallon of gas.
What kind of oil do I mix with gas for my leaf blower?
Two-cycle engines, like those in leaf blowers, require a gas and oil mix — the oil is a special type designed to mix with gas, and not motor oil. The oil bottles will generally be for mixing with either a gallon of gas or 2½ gallons of gas, depending on the volume of the oil.
What is the ratio of gas to oil for a leaf blower?
According to Stihl, gas and oil for leaf blowers should be mixed at a ratio of 50 parts gas to 1 part oil. This amounts to about 2.6 ounces of oil to each gallon of gas.
How long can gas sit in leaf blower?
Not only does fuel quality start to degrade after 30 days; fuel left to sit longer than that can damage the blowers tank and fuel lines.
Can you clean a fuel filter?
In general, the fuel filter is difficult to open, but it can still be cleaned to remove various dirt that has settled. If the dirt accumulated is too bad, you should replace a new air filter because the dirt that has settled for too long will be tough to clean and usually takes a long time.
What will a clogged fuel filter cause?
A clogged fuel filter causes low fuel pressure that results in a lean fuel condition and engine misfire. This can result in poor fuel mileage, rough idling and possibly cause the check engine light to come on. Once that light is on, it’s time for a trip to the repair shop.