How do I reset my Lutron occupancy sensor?

How do I reset my Lutron occupancy sensor?

Step 1: Quickly triple tap and hold the Test or Light button on the Sensor. DO NOT release after third tap. Step 2: Keep the button pressed after the third tap for a few seconds until the dome LED begins to flash slowly (approximately once per second). The Sensor has now been returned to Factory Default Settings.

How do you turn off occupancy sensor light switch?

The only way to turn off the override function is to turn the switch off and wait for 30 seconds to 1 minute before you turn it on again. This should reset the sensor so that it works on motion detection again.

Can I put a motion sensor on a 3-way switch?

When using in a 3-way application use one sensor and one standard 3-way switch. Cannot be used with another sensor, or in a 4-way application. WARNINGS AND CAUTIONS: If you are not sure about any part of these instructions, consult an electrician.

Can you put a motion sensor on a 4-way switch?

You cannot replace a 4-way switch with the sensor you have. The sensor you are using can either function as a 2-way or 3-way switch, it does not function as a 4-way switch. This is what a typical 4-way circuit looks like.

Can you use Lutron Caseta without bridge?

Do I need to have a Smart Bridge to use Caséta products? Caséta dimmers & switches are able to communicate directly to Lutron Pico remotes and do not require a bridge or wifi to function.

Why is my motion light staying on all the time?

What Causes my Light to Stay On? Several things can cause your motion detector to stay on, including age, storm damage, a power surge, improper installation, and improper settings. A few issues are easy to correct without professional help.

What is the difference between a vacancy sensor and an occupancy sensor?

Occupancy sensors may offer an option selection to switch the occupancy sensor from automatically turning the lighting on to A vacancy sensor requires manual activation of the lighting by the occupant then turns the lights OFF automatically soon after an area is vacated.