How do I connect my HP LaserJet P1102 to my computer?

By Other

How do I connect my HP LaserJet P1102 to my computer?

Connect a USB cable to the USB port on the rear of the printer , and then to the computer. Make sure the printer firmware is up-to-date. Go to Software and Driver Downloads, type your printer name, and then press Enter. Install any available firmware updates.

Why is my HP LaserJet P1102 not printing?

This HP LaserJet p1102w not printing with USB issue could occur if the printer is not configured properly on the network. Try resetting the printing system, but beware that this will remove any existing print queue and reset customized driver settings. Ensure your drivers are updated and try again to see if this helps.

Does HP LaserJet P1102 have WIFI?

Affordable, shared, wireless HP LaserJet printing in the home or office, using one of the most energy-efficient laser printers on the planet. Print from virtually anywhere with HP ePrint. Print wirelessly in your home or office: Network the printer without extra cables, using 802.11 b/g wireless networking.

How do I install HP LaserJet printer?

Method one: Download the printer software from 123.hp.com

  1. Connect the network cable to the printer and to the network.
  2. 2-line control panels: On the printer control panel, press the OK button.
  3. Go to 123.hp.com/laserjet.
  4. When the Download your installation software screen displays, click Download.

How do I reset my HP LaserJet p1102?

To restore the printer back to factory settings, turn the printer off, hold down the wireless button and the cancel button (x button) then turn the printer back on and don’t release the two buttons until the printer stops making noise.

How do I connect my HP LaserJet p1102w wireless without USB?

Press the WPS button on your wireless router. On the printer control panel, press the Wireless button . The wireless light starts to blink. Wait up to two minutes while the printer establishes a network connection with the wireless router.

How do I enable direct printing on HP LaserJet p1102w?

The instructions say to “access the Embedded Web Server, then click Networking, then click Wireless Direct Setup, then check box next to Wireless Direct Printing Name (SSID), and then enter the network name (SSID) in the field.”

How do I connect my HP LaserJet p1102 printer to WiFi?

Here are the steps:

  1. Unplug the USB cable from the printer and computer if present.
  2. Go to Control panel – Programs and feature – Select all the HP LaserJet printer entries and uninstall them.
  3. Restart your computer.
  4. When prompted, select the Connect through a wireless network option.

How do I connect my HP Laserjet p1102w wirelessly without cable?

How do I connect my HP Laserjet printer to WiFi?

Connect the printer with the Wireless Setup Wizard (printers with a touchscreen)

  1. Place the printer near the Wi-Fi router.
  2. Open the Setup, Network, or Wireless settings menu, and then select Wireless Setup Wizard.
  3. Select the name of your network, and then enter the password to complete the connection. Note:

How to install HP printer driver in Windows 10?

Method 1: Manually Download HP LaserJet 1020 Driver from Official Website. This method is only for those users who have in-depth technical knowledge,especially about the drivers.

  • Method 2: Install and Update HP LaserJet 1020 Printer Driver in Device Manager.
  • Method 3: Use Bit Driver Updater to Install Latest HP LaserJet 1020 Printer Driver.

    • How to reset HP LaserJet P1102 printer?

    Turn the printer off, disconnect it from the wall outlet. Then reconnect it again and try the reset again. To restore the printer back to factory settings, turn the printer off, hold down the wireless button and the cancel button (x button) then turn the printer back on and don’t release the two buttons until the printer stops making noise.

    How to connect HP LaserJet P1102w to computer?

    Press “Windows key”+”r” to get the “Run” window.

  • Type “services.msc” to get Services – Go to “Print spooler” – Right-click and “Stop” the service.
  • Now again open “Run” – Type “spool” and ok – Go to PRINTERS folder – delete everything in that folder.
  • Go to services again – Start the print spooler.
  • Now check for issue resolution.

    • How to setup HP LaserJet P1102w?

    Setup the printer via a USB cable on a Windows (or perhaps Mac/Linux) PC,

  • Enabled the web services from the printer network control panel,
  • Registered for HP ePrint,