How do I configure my broadband modem?

By Other

How do I configure my broadband modem?

Modem configuration:

  1. In the Internet Explorer, type 192.168.1.1 and press enter.
  2. Type username as admin and password as admin and press OK.
  3. Click “Advanced Setup”
  4. Click Edit button against VPI/VCI -0 and 35.
  5. Click Next in the above screen.
  6. Select PPP over Ethernet (PPPoE) in the above screen.

How can I increase my Hathway router signal strength?

However, before you contact your service provider, follow these easy tips for fixing your broadband internet connection:

  1. Check the cables and the extensions:
  2. Power cycling and decoding the blinking lights:
  3. Check the micro-Filter:
  4. Scan for Viruses:
  5. Check your Data Pack:
  6. Update your Firmware:

How do I activate my Hathway modem?

  1. Connect to Wi – fi .
  2. Enter your existing Wi-Fi password under “Admin Password” and click on Login .
  3. Click on “Settings” on the Main Menu, select “Wireless”
  4. Enter your preferred Wi-Fi name in the Box next to “Wi-Fi Name ( SSID )”
  5. Enter your Preferred Password in the Box next to “Password”

How do I find my Hathway router username and password?

You need to log in now. (Username is Admin and password is on the sticker). You may also need to enter the Validate Code – below the username and password.

What is Hathway router username and password?

The default IP address is 192.168. 1.1, and the default login username and password both are admin (all lower case).

How do I set my wireless router range?

6 ways to extend your Wi-Fi range

  1. Move your existing router to a better position.
  2. Buy a new, better router.
  3. Buy a mesh Wi-Fi kit.
  4. Buy a Wi-Fi extender / booster.
  5. Buy a powerline networking adapter set with Wi-Fi.
  6. Switch to 2.4GHz from 5GHz.

How do I fix poor Wi-Fi signal?

7 Easy Ways to Fix a Weak WiFi Signal

  1. Get a Modern Router. I just moved and recently got cable.
  2. Don’t Hide Your Router.
  3. Buy a WiFi Extender.
  4. Check for Router Updates.
  5. Use a Long Range Router.
  6. Kick Your Neighbors Offline.
  7. Perform a Speed Test.

How do I setup my ZTE router?

Set up Wi-Fi on ZTE F688

  1. Type 192.168.1.1 at Browser then press Enter. Username = admin.
  2. Go to Local Network > WLAN. WLAN On/Off Configuration.
  3. WLAN Global Configuration : 2.4GHz.
  4. WLAN Global Configuration : 5GHz.
  5. WLAN SSID Configuration : SSID1 (2.4GHz) / SSID5 (5GHz)

How long does it take to activate Hathway WIFI?

How long does it take time for a new broadband connection installation? Once an online payment is made, it can take 30 minutes to four hours for the account to get activated.

How can I know my Hathway IP address?

At the command prompt, type Ipconfig, and then press Enter. Now find the Default Gateway section. Next to the Default Gateway, you will see a number. This number represents your IP address.

How do I change my Hathway WIFI password ZTE?

Type http://setup.zte in the address bar, then press Enter on your keyboard. Type http://setup.zte in the address bar, then press Enter on your keyboard. Enter the password (default is admin), then click Login. Enter the password (default is admin), then click Login.

How do I configure my router to use wpa2?

Here’s how to change your encryption type:

  1. While you’re logged into your router’s settings, find the wireless network configuration section on the wireless security or wireless network page.
  2. Select the WPA or WPA 2 option.
  3. Click “Save” and “Apply”. You might need to reboot the router for the new settings to take effect.

How can I improve my 2.4 GHz Wi-Fi?

How to improve your internet speed

  1. Turn things off and on again.
  2. Move your router to a better location.
  3. Switch your Wi-Fi frequency band.
  4. Adjust your router’s antennas.
  5. Extend your Wi-Fi network.
  6. Prune unnecessary connections.
  7. Change your Wi-Fi frequency channel.
  8. Upgrade to faster internet.