Are Oso cylinders any good?
The OSO Delta has a 10mm vacuum panel, backed up with 40mm of foam and is comfortably the best insulated product available – the only full range of A-rated cylinders on the market. A 300 litre Delta loses only 3.5°C in 24 hours, an equivalent older cylinder from circa 2000 lost 13°C.
Is OSO unvented water heater?
OSO Hotwater is the world’s largest manufacturer of stainless steel unvented hot water cylinders. Manufactured in Norway since 1932, OSO cylinders have won countless awards for quality and sustainable production.
What is an OSO cylinder?
OSO Hotwater is one of the largest manufacturers of Word class electric and indirect stainelss steel hot water cylinders. Manufactured in Norway since 1932, OSO cylinders have won countless awards for quality and sustainable production.
How often does a Megaflo need recharging?
With just a handful of external controls, there is little to go wrong. However, the internal air gap needs recharging regularly. This is a reasonably straightforward process and should be carried out at least annually. An indication that the air gap needs charging is a visual warning via the Tundish.
How does an economy 7 water heater work?
Economy 7 Cylinders are hot water cylinders are designed specifically to work with the cheaper rate Economy 7 Tariff, or Maxistore 7 as it is sometimes referred to. The cylinders feature two immersion heaters which are located at different heights in the cylinder and programmed to work at different times of the day.
How long does a Megaflow last?
Megaflo cylinders are a great fit for homes with high hot water demand. There is a good warranty of 25 years for peace of mind, and the system as a whole pumps hot water efficiently to your hot water outlets – you won’t freeze in the shower if someone puts on the tap in another part of the house.
What should pressure be on Megaflo?
A minimum of 1.5 bar pressure and 20 l/m flow rate is recommended by most manufacturers.
How long does a hot water boost take?
However, if the system has an element located midway down the cylinder, you could see 30% heated within 30 minutes. With a boost element near the bottom, you could feasibly warm 90% of the water in 30 minutes.
Does a Megaflow system need servicing?
It is strongly recommended that you get your Megaflo serviced every 12 months in order to keep it in peak working order and avoid these issues.