What is a Plough plane for?
A grooving plane, plow plane, or plough plane is a plane used in woodworking to make grooves and (with some of the metal versions) small rabbets. They are traditionally used for drawer bottoms or rear walls.
Can you use a Plough plane as a rebate plane?
You can indeed use a plough plane to cut certain rebates. A dedicated rebate plane has various advantages. It has a greater width of cut, as well as being able to use it with the fence off to clean up wide tenons and in other various situations.
How do you sharpen a plough plane blade?
To sharpen a plough plane blade, spray your sharpening plates with auto-glass cleaner to float off waste metal, preventing clogging and rusting to the sharpening plates. You can either hold the blade between your forefinger, thumb and middle finger, or use a honing guide to give you something bigger to grip.
Can you cut a rabbet with a plow plane?
The plow plane can also be used to cut a rabbet joint. After the scribe lines are complete, set the fence so the groove runs along the inside edge of the rabbet. The depth may also be set and you can work along until you have a groove plowed on the inside of the rabbet thus creating your inside shoulder and depth.
What is the best rabbet plane?
Of the ones shown above, the Veritas skew rabbet plane is by far the fastest. (And because it has a nicker, depth stop, and movable fence, it is technically a moving fillister plane – a plane designed to be used both with and across the grain.)
Do I need a router plane?
Synopsis: If you have a router, do you really need a router plane? Dan Faia says yes. Router planes, which are more like shoulder planes than routers, are invaluable for cleaning up and trimming tenon cheeks and other joinery, hinge mortises, inlay mortises, and more.
What is a chisel plane?
A Chisel Plane can accomplish tasks impossible for normal planes. Because it lacks support in front of the blade, a Chisel Plane does not function like a typical plane but rather more like a paring chisel with very precise depth control.
Can you plane wood with a router?
Making your own planer from a router is easy, and it works with any router you have. Once the router sled is made you can use it for all kinds of projects, and converting the router into a planer any time you need it takes less than a minute.
Is Veritas combination plane worth it?
It’s a great plane that’s far easier to use than those old combination planes. Knurled brass knobs dominate the plane’s appearance and function. The many moving parts can seem confusing at first, but they are the plane’s greatest virtue. Every adjustment, except for one (the cross-grain nickers), is toolless and easy.
What is a plough plane made of?
A plough plane is built around a set of 8 irons, which run from 1/8” through 5/8”. These are tapered, substantial in thickness, and grooved at the back. The groove rests on the rigid leading edge of the rear skate, which creates a stable base.
Where can I find more information on Plough planes?
For more information on Plough Planes, see our beginner site Common Woodworking. I have ploughed grooves for 50 years and used every type of plough plane I think.
Why did the wooden plough plane become obsolete?
This took skilled work and was the primary reason for the demise of the wooden plough plane. In every step toward industrialized production came a reduction in the need for quality skilled workers who could work the more refined areas of plane making.
Are plow planes easy to use?
Plow planes are some of the easiest joinery planes to use , once you know a few tricks to getting good results. I struggled with the tools until Don McConnell (now a planemaker at Clark & Williams) set me straight years ago with one simple piece of advice: “Each hand should have a separate job,” he said. “One hand holds the fence.